Kansas City Plumbing Company Explains How To Prevent Frozen Pipes – Press Release

Newcomer plumbing.

In fact, the frozen pipes result from cold temperatures that create pressure from inside the pipe and can cause the pipe to rupture. For anyone living in an area where the weather temperature is too low in winter, some precautions need to be taken to protect the pipes from freezing and to avoid cleaning after a pipe burst.

Protecting your pipes from low temperatures will have a mild winter with no scars like blowouts due to freezing of the water. However, it is a typical breakdown between December and February, and pipe repairs can be expensive during these months.

What can you do to prevent your water pipes from freezing?

If you live in damp and cold areas, your water pipes will be exposed to harsh weather conditions, as is the case in many low-rise houses or maisonettes. Therefore, you need to think about special precautions to avoid frozen pipes. A few tips are given that need to be considered:

Trick # 1: stop water droplets:

When water freezes in the tap it can be a real danger to us. Hence, it is important to loosen water droplets that appear in your plumbing system, from faucets to sinks, especially those closer to the outside or directly in the open air.

Trick # 2: Observe the outside of the water pipes:

Always empty the hoses in your garden or yard to avoid having water that turns into ice. If temperatures are about to drop below zero, disconnect them from the external stopcock to prevent freezing. If you have a reservoir of water outside, prevent it from freezing by pouring some glycerin into the tank.

Trick # 3: install the heat tapes:

Basement and exterior parts of the house usually have heating tapes. To install these tapes, you will need many insulation accessories that you should install to prevent the pipes from freezing. When it comes to heat tapes, there are different types with different materials on the market. Some have a built-in thermostat that requires the tape to tangle between the pipe and the insulation.

Trick No. 4: move water to prevent freezing:

When the electrical fluid is not available and everything is exposed to the cold. It is better to circulate a thin and constant stream of water, the frictional force of which in the cold makes it more difficult to freeze the water it contains.

Trick # 5: give warmth to a frozen pipe:

Some plastics and copper will break if the junction is too rough or cracked from freezing, waiting to return to a warmer temperature to release all of the stored water.

If you see a broken pipe, contact a warranty installer to have the problem professionally fixed so you can avoid significant problems. You can heat it with a small soldering iron, hair dryer, or heat lamp if the tube is made of sturdy metal.

Media contact
Name of the company: Newcomer plumbing
Interlocutor: Aaron newcomer
E-mail: Send e-mail
Phone: 816-320-2780
Country: United States
Website: https://www.newcomerplumbing.com/

You might also like

Comments are closed.